Folding cartons
Reverse tuck end box
Free reverse tuck end box template. Enter your size to draw the dieline with tuck flaps, dust flaps and glue flap, then design it and fold it in 3D.
Default 120 × 180 × 55 mm · any sizeFree 3D box mockup generator—turn packaging artwork into a 3D box.
Use your own artwork and finished box dimensions to create a browser-based packaging mockup you can rotate, open, review, save, share, and export as a PNG.
Start your 3D box mockup from a template
Pick a template, enter your size and see the dieline redraw, or open it straight in the Studio.
Corrugated
Pizza box
Free pizza box template for 10, 12, 14 and 16 inch boxes. See the flat layout, add your branding, fold the box in 3D and export PNG mockups.
Default 305 × 45 × 305 mm · any size
Corrugated
Mailer box
Free mailer box template (FEFCO 0427 roll end tuck top). Enter your inside size to draw the dieline, brand the outside and inside, fold it in 3D and export a 1:1 PDF.
Default 220 × 80 × 160 mm · any size
Rigid
Rigid lid and base box
Free rigid lid and base box template. Enter your size to draw the base and lid wraps with corner ears and turn-ins, design them and see the lid lift off in 3D.
Default 200 × 60 × 150 mm · any size
Folding cartons
Straight tuck end box
Free straight tuck end box template. Enter your size to draw the dieline with both lids on the front, tuck flaps, dust flaps and glue flap, then design it and fold it in 3D.
Default 65 × 160 × 65 mm · any size
Folding cartons
Auto lock bottom box
Free auto lock bottom (crash lock) box template. Enter your size to draw the dieline with a tuck top, pre-glued locking bottom flaps and glue tabs, then design it and fold it in 3D.
Default 100 × 140 × 70 mm · any size
Folding cartons
Snap lock bottom box
Free snap lock (1-2-3) bottom box template. Enter your size to draw the dieline with a tuck top and a four-flap locking bottom that closes by hand with no glue, then design it and fold it in 3D.
Default 90 × 130 × 60 mm · any size
Folding cartons
Pillow box
Free pillow box template. Enter your size to draw the pillow box dieline with its curved end creases, end flaps and glue flap, then design it and see it curve closed in 3D.
Default 160 × 40 × 90 mm · any size
Folding cartons
Gable box
Free gable box template. Enter your size to draw the gable box dieline with its roof, carry handle, gusseted gable ends and auto-lock bottom, then design it and fold it closed in 3D.
Default 120 × 90 × 70 mm · any size
Folding cartons
Drawer box
Free drawer box template. Enter your size to draw the dieline for a sliding tray and its sleeve, with thumb notches, corner ears and turn-ins, then design it and watch the drawer slide out in 3D.
Default 120 × 40 × 80 mm · any size
Folding cartons
Four-corner tray
Free four-corner tray template. Enter your size to draw the dieline for an open tray with glued corner ears, download it as SVG, PDF or DXF, and fold it in 3D.
Default 160 × 50 × 110 mm · any size
Folding cartons
Telescope box
Free two-piece telescope box template. Enter your size to draw the base and lift-off lid with glued corners, download the dieline, and watch the lid close in 3D.
Default 220 × 80 × 150 mm · any size
Folding cartons
Cake box
Free cake box template. Enter your size to draw a one-piece bakery box with locking corners and an optional lid window, download the dieline, and fold it in 3D.
Default 250 × 125 × 250 mm · any size
Folding cartons
Sleeve box
Free packaging sleeve template. Enter the size of your tray or product to draw an open-ended sleeve with a glue flap, design the wrap and preview it in 3D.
Default 180 × 120 × 60 mm · any size
Corrugated
Split top box
Free split top shipping box template (FEFCO 0201). Enter your size to draw the slotted cutting template with four flaps at each end, design the outside and inside, and preview it in 3D.
Default 400 × 300 × 300 mm · any sizeSee the real product
Three steps from size to finished mockup.
These are real screens from 3D Box Studio, not a concept dashboard. Set up the box, design on the dieline, then review it in 3D and export.
Start free Free account required. Sign up with Google or email.
Pick a template, enter finished dimensions in mm or inches, and choose the board material.
Choose the box and size
Start from a supported structure and enter finished dimensions so the mockup reflects the proportions you are actually designing for.
Add your artwork
Upload graphics to the flat packaging layout and place them on the correct panels with layer and transform controls.
Review the assembled result
Orbit, zoom, switch camera views, and inspect how artwork wraps around edges and adjacent panels.
Open, close, and refine
Use the structure's opening behavior to check more than one closed presentation angle.
Export or share
Download a PNG or share a browser preview when you need feedback without sending an editable file.
Frequently asked questions
Direct answers before you start.
Useful details about this workflow, its current capabilities, and where production validation still matters.
Is the 3D box mockup generator free?+
Yes. 3D Box Studio runs in your browser with a free account, so you can start designing without installing desktop software.
Can I use my own artwork?+
Yes. Upload your graphics and place them on the box panels in the 2D workspace.
Can I use custom dimensions?+
Yes, for supported templates. Enter finished dimensions and choose the relevant unit.
Can clients view a mockup without editing it?+
Yes. Saved projects can provide shareable preview links for review.
Can I save and reopen a mockup later?+
Yes. Signed-in projects can be saved to your account and reopened from the project library.
Can I use the PNG in client or commercial work?+
Yes, provided you have the rights to the artwork and assets used in the design. Marketplace-specific image rules should still be checked before publishing.
Ready to see your packaging in 3D?
Create a free account, choose a structure, set the size, add artwork, and review the result in your browser.
Open 3D Box Studio