Folding cartons
Reverse tuck end box
Free reverse tuck end box template. Enter your size to draw the dieline with tuck flaps, dust flaps and glue flap, then design it and fold it in 3D.
Default 120 × 180 × 55 mm · any sizeBox templates built for real packaging structures.
Choose a supported structure, set its finished dimensions, design on its generated flat layout, and preview the package using that template's own geometry and opening behavior.
Ready-to-use box templates
Pick a template, enter your size and see the dieline redraw, or open it straight in the Studio.
15 templates
Corrugated
Pizza box
Free pizza box template for 10, 12, 14 and 16 inch boxes. See the flat layout, add your branding, fold the box in 3D and export PNG mockups.
Default 305 × 45 × 305 mm · any size
Corrugated
Mailer box
Free mailer box template (FEFCO 0427 roll end tuck top). Enter your inside size to draw the dieline, brand the outside and inside, fold it in 3D and export a 1:1 PDF.
Default 220 × 80 × 160 mm · any size
Rigid
Rigid lid and base box
Free rigid lid and base box template. Enter your size to draw the base and lid wraps with corner ears and turn-ins, design them and see the lid lift off in 3D.
Default 200 × 60 × 150 mm · any size
Folding cartons
Straight tuck end box
Free straight tuck end box template. Enter your size to draw the dieline with both lids on the front, tuck flaps, dust flaps and glue flap, then design it and fold it in 3D.
Default 65 × 160 × 65 mm · any size
Folding cartons
Auto lock bottom box
Free auto lock bottom (crash lock) box template. Enter your size to draw the dieline with a tuck top, pre-glued locking bottom flaps and glue tabs, then design it and fold it in 3D.
Default 100 × 140 × 70 mm · any size
Folding cartons
Snap lock bottom box
Free snap lock (1-2-3) bottom box template. Enter your size to draw the dieline with a tuck top and a four-flap locking bottom that closes by hand with no glue, then design it and fold it in 3D.
Default 90 × 130 × 60 mm · any size
Folding cartons
Pillow box
Free pillow box template. Enter your size to draw the pillow box dieline with its curved end creases, end flaps and glue flap, then design it and see it curve closed in 3D.
Default 160 × 40 × 90 mm · any size
Folding cartons
Gable box
Free gable box template. Enter your size to draw the gable box dieline with its roof, carry handle, gusseted gable ends and auto-lock bottom, then design it and fold it closed in 3D.
Default 120 × 90 × 70 mm · any size
Folding cartons
Drawer box
Free drawer box template. Enter your size to draw the dieline for a sliding tray and its sleeve, with thumb notches, corner ears and turn-ins, then design it and watch the drawer slide out in 3D.
Default 120 × 40 × 80 mm · any size
Folding cartons
Four-corner tray
Free four-corner tray template. Enter your size to draw the dieline for an open tray with glued corner ears, download it as SVG, PDF or DXF, and fold it in 3D.
Default 160 × 50 × 110 mm · any size
Folding cartons
Telescope box
Free two-piece telescope box template. Enter your size to draw the base and lift-off lid with glued corners, download the dieline, and watch the lid close in 3D.
Default 220 × 80 × 150 mm · any size
Folding cartons
Cake box
Free cake box template. Enter your size to draw a one-piece bakery box with locking corners and an optional lid window, download the dieline, and fold it in 3D.
Default 250 × 125 × 250 mm · any size
Folding cartons
Sleeve box
Free packaging sleeve template. Enter the size of your tray or product to draw an open-ended sleeve with a glue flap, design the wrap and preview it in 3D.
Default 180 × 120 × 60 mm · any size
Corrugated
Split top box
Free split top shipping box template (FEFCO 0201). Enter your size to draw the slotted cutting template with four flaps at each end, design the outside and inside, and preview it in 3D.
Default 400 × 300 × 300 mm · any sizeSee the real product
Three steps from size to finished mockup.
These are real screens from 3D Box Studio, not a concept dashboard. Set up the box, design on the dieline, then review it in 3D and export.
Start free Free account required. Sign up with Google or email.
Pick a template, enter finished dimensions in mm or inches, and choose the board material.
Folding carton structures
Tuck end cartons close with tuck lids, top and bottom. The auto lock bottom box keeps the tuck top but has a pre-glued crash-lock bottom that locks itself when the carton is opened, for heavier products; the snap lock bottom box closes its four bottom flaps by hand, with no glue. The pillow box has two bowed faces and curved ends that close when pushed in, the gable box has a pitched roof with a carry handle over an auto-lock bottom, and the drawer box is a tray that slides out of a sleeve. The four-corner tray is an open tray with glued corners; with a second, larger tray as its lid it becomes a telescope box. The cake box is a one-piece bakery box whose corners lock without glue, with an optional window in its lid.
Lid and box structures
Two-part or lid-based packaging needs different opening logic and panel relationships than a folding carton, so it is treated as its own structure type.
Mailer-style packaging
The mailer box is the one-piece roll end tuck top mailer (FEFCO 0427): double side walls that lock into the base, and a lid that tucks in at the front. For plain shipping cartons, the split top box is a slotted shipper with four flaps at each end.
Template-specific behavior
Dimensions, dieline geometry, panel mapping, folds, and opening behavior belong to each template so adding a new structure does not require changing the rules for every existing box.
Frequently asked questions
Direct answers before you start.
Useful details about this workflow, its current capabilities, and where production validation still matters.
Which box templates are available?+
Reverse tuck end carton, straight tuck end box, auto lock bottom box, snap lock bottom box, pillow box, gable box, drawer box, four-corner tray, telescope box, cake box, pizza box, split top box, mailer box, sleeve box and rigid lid and base box are ready now.
Can I resize a template?+
Yes, supported templates can use editable finished dimensions.
Do all templates open the same way?+
No. Opening and folding behavior is structure-specific.
Can new structures be added later?+
Yes. The template architecture is designed so new structures can define their own geometry and behavior without hard-coding the entire Studio around one dieline.
Can template dimensions be changed after artwork is added?+
Yes. Supported structures are dimension-driven, although major size changes can affect artwork placement and should be reviewed again in both 2D and 3D.
Does each template have its own dieline?+
Each supported template defines the flat panel layout and geometry used by the Design workspace. The layout is generated from the Studio's own template rather than imported from an external dieline file.
Ready to see your packaging in 3D?
Create a free account, choose a structure, set the size, add artwork, and review the result in your browser.
Open 3D Box Studio