Folding cartons
Reverse tuck end box
Free reverse tuck end box template. Enter your size to draw the dieline with tuck flaps, dust flaps and glue flap, then design it and fold it in 3D.
Default 120 × 180 × 55 mm · any sizeFree box dieline generator: draw it to size, download it, fold it in 3D.
Pick a box style, type your size, and download the dieline as SVG, PDF, DXF, PNG or a Cricut file. Free, with no account, no watermark and no limits.
Choose a style and size
Free · no account · SVG, PDF, DXF, PNG and Cricut
Templates with guides for each box
Pick a template, enter your size and see the dieline redraw, or open it straight in the Studio.
Corrugated
Pizza box
Free pizza box template for 10, 12, 14 and 16 inch boxes. See the flat layout, add your branding, fold the box in 3D and export PNG mockups.
Default 305 × 45 × 305 mm · any size
Corrugated
Mailer box
Free mailer box template (FEFCO 0427 roll end tuck top). Enter your inside size to draw the dieline, brand the outside and inside, fold it in 3D and export a 1:1 PDF.
Default 220 × 80 × 160 mm · any size
Rigid
Rigid lid and base box
Free rigid lid and base box template. Enter your size to draw the base and lid wraps with corner ears and turn-ins, design them and see the lid lift off in 3D.
Default 200 × 60 × 150 mm · any size
Folding cartons
Straight tuck end box
Free straight tuck end box template. Enter your size to draw the dieline with both lids on the front, tuck flaps, dust flaps and glue flap, then design it and fold it in 3D.
Default 65 × 160 × 65 mm · any size
Folding cartons
Auto lock bottom box
Free auto lock bottom (crash lock) box template. Enter your size to draw the dieline with a tuck top, pre-glued locking bottom flaps and glue tabs, then design it and fold it in 3D.
Default 100 × 140 × 70 mm · any size
Folding cartons
Snap lock bottom box
Free snap lock (1-2-3) bottom box template. Enter your size to draw the dieline with a tuck top and a four-flap locking bottom that closes by hand with no glue, then design it and fold it in 3D.
Default 90 × 130 × 60 mm · any size
Folding cartons
Pillow box
Free pillow box template. Enter your size to draw the pillow box dieline with its curved end creases, end flaps and glue flap, then design it and see it curve closed in 3D.
Default 160 × 40 × 90 mm · any size
Folding cartons
Gable box
Free gable box template. Enter your size to draw the gable box dieline with its roof, carry handle, gusseted gable ends and auto-lock bottom, then design it and fold it closed in 3D.
Default 120 × 90 × 70 mm · any size
Folding cartons
Drawer box
Free drawer box template. Enter your size to draw the dieline for a sliding tray and its sleeve, with thumb notches, corner ears and turn-ins, then design it and watch the drawer slide out in 3D.
Default 120 × 40 × 80 mm · any size
Folding cartons
Four-corner tray
Free four-corner tray template. Enter your size to draw the dieline for an open tray with glued corner ears, download it as SVG, PDF or DXF, and fold it in 3D.
Default 160 × 50 × 110 mm · any size
Folding cartons
Telescope box
Free two-piece telescope box template. Enter your size to draw the base and lift-off lid with glued corners, download the dieline, and watch the lid close in 3D.
Default 220 × 80 × 150 mm · any size
Folding cartons
Cake box
Free cake box template. Enter your size to draw a one-piece bakery box with locking corners and an optional lid window, download the dieline, and fold it in 3D.
Default 250 × 125 × 250 mm · any size
Folding cartons
Sleeve box
Free packaging sleeve template. Enter the size of your tray or product to draw an open-ended sleeve with a glue flap, design the wrap and preview it in 3D.
Default 180 × 120 × 60 mm · any size
Corrugated
Split top box
Free split top shipping box template (FEFCO 0201). Enter your size to draw the slotted cutting template with four flaps at each end, design the outside and inside, and preview it in 3D.
Default 400 × 300 × 300 mm · any sizeSee the real product
Three steps from size to finished mockup.
These are real screens from 3D Box Studio, not a concept dashboard. Set up the box, design on the dieline, then review it in 3D and export.
Start free Free account required. Sign up with Google or email.
Pick a template, enter finished dimensions in mm or inches, and choose the board material.
Free, with no account
The generator above runs in your browser. Pick a style, type the length, width and depth in millimetres or inches, choose whether they are the inside, the outside or crease to crease, and pick your board. The dieline redraws as you type, with cut, crease, glue, bleed and safe-zone lines. Downloads need no sign-up, carry no watermark and have no limit.
- 15 styles: tuck end, snap lock and auto lock bottom cartons, mailer (FEFCO 0427), shipping carton (FEFCO 0201), pillow, gable, sleeve, pizza, drawer, tray, telescope, cake and rigid boxes
- Inside, outside or manufacture sizes, with board thickness worked in
- SVG, PDF (one page or tiled on A4 or Letter), DXF, PNG and a Cricut or Silhouette file
- A link that reopens the same box, to send to a printer or a colleague
Start with a supported structure
Choose a box template whose panel geometry and folding behavior are defined in the Studio. This gives the dieline a structural basis instead of treating it like a decorative outline.
- Structure-specific panels
- Finished dimensions
- Selectable units
Generate the flat layout
The Studio uses the structure and dimensions to create the 2D layout used for artwork placement and panel mapping.
- Panel boundaries
- Fold/cut layout for design context
- Artwork surface mapping
Design directly on the dieline
Add graphics to the flat layout with visual editing tools rather than guessing where perspective artwork belongs on a 3D mockup.
- Drag and drop artwork
- Crop and transform
- Layer management
- 2D-to-3D preview
Download it as PDF, SVG or DXF
Export the dieline at 1:1 in millimetres. The PDF carries your artwork, bleed and cut and crease lines for the printer. The SVG and DXF carry the cutting template on its own, with cut lines and crease lines on separate layers, for die makers, CAD programs and cutting tables.
- 1:1 vector PDF with artwork and bleed
- SVG for Illustrator, Inkscape and Affinity
- DXF R12 in millimetres for CAD and cutting tables
- Separate CUT and CREASE layers
Validate before manufacturing
Use the generated layout for design and visualization, then verify final production details with your printer or structural packaging specialist before plates, tooling, or manufacturing.
Important limitation
Use generated dielines for design, panel planning, and visualization. Before production, validate final geometry, bleed, folds, tolerances, material behavior, and tooling requirements with the printer or structural packaging workflow responsible for manufacturing.
Frequently asked questions
Direct answers before you start.
Useful details about this workflow, its current capabilities, and where production validation still matters.
Is the dieline generator free? Do I need an account?+
It is free, and downloading needs no account: SVG, PDF, DXF, PNG and Cricut files download straight from this page, without a watermark or a limit. A free account is only needed to open the box in 3D Box Studio, where you add artwork and fold it in 3D.
Can I cut the dieline on a Cricut or Silhouette?+
Yes. Download the Cricut / Silhouette file: an SVG sized in inches with only the cut lines (black) and score lines (blue). In Design Space, set the blue lines to Score. Silhouette Studio Basic can't open SVG, so use the DXF there. A 12 × 24 in mat cuts boxes up to about 292 × 597 mm flat; the generator tells you whether yours fits.
Can 3D Box Studio generate a dieline from dimensions?+
For supported structures, yes. The Studio can create the flat layout from the selected template and finished dimensions.
Is the generated dieline press-ready?+
It is a 1:1 cutting template drawn from your inside size and board thickness, ready for proofs, samples and quotes. Each factory has its own board, crease rules and tooling, so have your printer confirm the final die before production.
Can I design artwork on the generated dieline?+
Yes. The flat layout is part of the artwork workflow, so you can place, transform, and organize graphics there.
Can I preview the generated dieline as a 3D box?+
Yes. The same structure and artwork can be viewed in the interactive 3D workspace.
Can I upload an external dieline into 3D Box Studio?+
No. The current workflow is based on 3D Box Studio's own supported packaging templates and their dimensions. External dieline importing is intentionally not part of the product right now.
Can I export the flat layout as a PDF?+
Yes. Preview & Download exports a 1:1 vector PDF with your artwork, adjustable bleed, and cut and crease lines. Have your printer review it against their structural requirements before production.
Can I download the dieline as SVG or DXF?+
Yes, for every box template and for free. The SVG and DXF contain the cutting template at 1:1 in millimetres, with cut lines on a CUT layer and crease lines on a CREASE layer, ready for Illustrator, CAD programs, die makers and cutting tables.
Ready to see your packaging in 3D?
Create a free account, choose a structure, set the size, add artwork, and review the result in your browser.
Open 3D Box Studio